Flashforge Adventure 5M Pro Best Settings

Experience with Flashforge Adventure 5M Pro

• A user recommends running the calibrations in Orca for PLA or PLA Silk.
• The printer has been praised for its solid hardware and compatibility with Mainsail, Moonraker, and Klipper. Users mention work needed to make this happen.
• Some issues with config files and firmware have been highlighted for the 5M Pro.

Printer Settings and Filament

• Users share experiences with printing speeds ranging from 200-250 mm/s up to 700 mm/s depending on the filament type.
• Different filaments like PLA, HS-PLA, Matte PLA, PETG, and Silk PLA were used successfully with stock settings or slight temperature adjustments.

Troubleshooting and Improvements

• OrcaSlicer is recommended over FlashPrint due to software bugs.
• Issues like print out of range errors, camera disabling, and WiFi functionality are mentioned, with users suggesting solutions and workarounds.

Community Feedback and Recommendations

• There is excitement and positive feedback regarding updates for the FlashForge printers and tools like OrcaSlicer.
• Some users express disappointment with customer support and unresolved issues with older models.
• Open source compatibility is highlighted as essential for the 3D printing community.

User Assistance

• A bot provides a reminder for troubleshooting print quality issues with details needed for help like printer, slicer, filament, temperatures, and settings.

Additional Information on Printing Techniques

• Curling issues are addressed due to inadequate cooling, with a guide shared for troubleshooting such printing problems.

Overall, the Reddit comments shared experiences, recommendations, and challenges related to Flashforge Adventure 5M Pro, highlighting a mix of positive user experiences, troubleshooting tips, and suggestions for optimizing settings and software choices.